Small 50 TP

The Small 50 TP shares many of the same components as the Small 50 with a few major differences. The TP (Tuck Pointer) is made to be used for slower less voluminous applications such as pointing. The onboard computer has been reconfigured to benefit such demands in conjunction with a different stator which is capable of a 2 GPM output versus the 3.5 GPM of the 2L3 stator on the Small 50. Simply put, it is designed to raise the RPM and to reduce the flow similar to a car in first gear. The advantages to this are that the motor can spin faster, since the motor is cooled by a fan, to have a better cooling effect. The motor, since it is operating at a higher speed, can increase the horsepower to the stator since it can run at a higher amperage.

Since the material being delivered will be significantly slower to the end of the line and material consuption is drastically less, the TP utilizes a new vibrating chasis that will keep the material moving down the hopper into the stator. This eliminates the need to scrape the sides manually. A hatch is cleverly added so as not to disrupt production in case the material needs to been retempered manually.

The vibrating screen and shaker is a drop in device that will also fit with the standard Mighty Small 50 but comes standard with the Mighty Small 50 TP. The shaker can filter out particles up to 5/16" in diameter which can cause clogs in the nozzles or tips. A 3/4" garden hose can be used with the TP so that it is lighter to use for the applicator and less volume is needed to fill the hose. The TP can support 25" (~1") cam lever hose which is used with the regular Mighty Small 50.

Other uses of the TP can include the application and spray of Thoroseal, elastomeric coatings, paint, acrylic stucco and other materials which are applied with low volume. A gun kit, hoses and compressor can be added for spraying applications.